1. IDENTIFICATION OF THE SUBSTANCE AND THE COMPANY

Product Name

Company Name

DIISO 75BA

Biodeg Chemical Co Ltd

Edwards Lane, Speke, Liverpool L24 9HW

Tel: +44 151 486 1873 Fax: +44 151 448 1433

Email: safety@biodeg.co.uk

Out of Normal Hours Tel: +44 7973 411019

 

2. COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient Name

Hexamethylene-1,6- diisocyanate (HMDI)

 

n-Butyl acetate

Concentration

<0.5%

 

 

25%

Classification

 

 

 

F

Risk Phrases

R42/43

(advisory)

 

R10

EC Number

212-485-8

 

 

204-658-1

CAS Number

822-06-0

 

 

123-86-4 

3. HAZARDS IDENTIFICATION

Flammable. Contains isocyanates.

May cause sensitisation by inhalation or skin contact. (Advisory risk phrase)

4. FIRST AID MEASURES

EYE CONTACT

SKIN CONTACT

 

INHALATION

 

INGESTION

Rinse immediately with plenty of water and seek medical advice.

Wash off immediately with plenty of soap and water, seek medical advice if contamination extensive or irritation persists.

Provide fresh air. Monitor breathing, sensitive individuals may have asthmatic attack. If asthma symptoms appear seek immediate medical advice.

Seek immediate medical advice.

5. FIRE FIGHTING MEASURES

SUITABLE EXTINGUISHING MEDIA

Water spray, foam, CO2, dry powder

UNSUITABLE EXTINGUISHING MEDIA

None

UNUSUAL FIRE & EXPLOSION HAZARDS

Risk of pressure rise and explosion in sealed containers.

Hazardous fumes in fires: isocyanate-containing vapours. Under certain fire conditions, traces of related toxic products may occur. Have ready respiratory protection equipment.

SPECIAL PRECAUTIONS & UNUSUAL HAZARDS

In case of fire wear self-contained breathing apparatus.

6. ACCIDENTAL RELEASE MEASURES

SPILL CLEAN UP METHODS

SPECIAL PRECAUTIONS:

No smoking, no naked flames, use spark resistant materials.

Provide sufficient ventilation. Keep bystanders clear and upwind.

Keep away from drains, water courses and soil.

LARGE QUANTITIES:

Dam with sand or earth, pump to storage for recovery.

SMALL QUANTITIES:

Take up mechanically or with an absorbent material. Wash residue with alkaline detergent solution.

7. HANDLING AND STORAGE

SPECIAL STORAGE CONDITIONS

Provide good ventilation or extraction. Store between 5 and 25° c

STORAGE PRECAUTIONS

Keep containers tightly closed. Store in a dry place in a well-ventilated area.

SUITABLE STORAGE MATERIALS

Mild steel, stainless steel, some plastics

UNSUITABLE STORAGE MATERIALS

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION

INGREDIENT NAME EC NUMBER TWA/OEL (8 Hr) MEL (15 Min)

n-Butyl acetate 204-658-1 150 ppm/724 mg/m³ 200 ppm/966 mg/m³

Hexamethylene diisocyanate 212-485-8 0.02 mg/m³ 0.07 mg/m³

ENGINEERING PROTECTION

Extract vapours at source.

CLOTHING : No special requirements.

RESPIRATOR : Yes, if the TWA may be exceeded.

GLOVES : Impervious. PVC or butyl rubber.

OTHER : Eye protection to BS2092 part 2C or BS2092 part 1 in high risk areas.

9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE/FORM

ODOUR

SOLUBILITY IN WATER

pH (10% w/w in water)

SOLUBILITY IN ORGANIC SOLVENTS

BOILING POINT (° c)

FLASH POINT (°c)

LOWER EXPLOSION LIMIT

Thick liquid

Weak esteric

<10% reacts slowly n/a

High

 

35° c

1.2 vol %

 

COLOUR

MOLECULAR WEIGHT

SPECIFIC GRAVITY

VAPOUR DENSITY

VAPOUR PRESSURE OF POLYMER (mbar)

AUTO IGNITION TEMP (°c)

UPPER EXPLOSION LIMIT

EXPLOSIVE PROPERTIES

Pale yellow

Mixture

1.1

>1 (air=1)

<0.001 @ 20° c <0.015 @ 25° c

>400° c

 7.5 vol %

Yes

10. STABILITY AND REACTIVITY

STORAGE CONDITIONS TO AVOID :

Store between 5 and 30°c

MATERIALS TO AVOID

Reacts violently with amines and some alcohols.

STABILISERS REQUIRED : None

HAZARDOUS PRODUCTS OF DEGRADATION

Isocyanate –containing vapours

11. TOXICOLOGICAL INFORMATION

LD50 (ORAL, RAT) : >5,000 mg/kg

LC50 (INHAL, RAT) : >100 mg/m³/13 weeks

LD50 (DERMAL, RAT) : >7,000 mg/kg

EFFECTS OF OVEREXPOSURE : Toxic by inhalation of aerosols

SYMPTOMS OF OVEREXPOSURE : Irritation to skin, eyes and respiratory system.

Risk of sensitisation by inhalation or skin contact.

12. ECOLOGICAL INFORMATION

MOBILITY : Low, polymerises in the presence of moisture.

DEGRADABILITY : >60% DOC

BIOACCUMULATIVE POTENTIAL : High, will form insoluble polyureas which will not decompose readily.

ECOTOXICITY

OZONE EFFECTS

13. DISPOSAL CONSIDERATIONS

DISPOSAL OF PRODUCT

Subjected to special treatment, dispose of as special waste in conformance with local regulation e.g. in waste incineration plant suitable for materials causing emissions of harmful substances.

DISPOSAL OF PACKAGING

Decontaminate with a dilute solution of detergent (1%) and ammonia (3%) for 48 hours. Dispose of as special waste.

SPECIAL EC OR NATIONAL LEGISLATION

14. TRANSPORT INFORMATION

UN No : 1866 PACKING GROUP : 3

ROAD (UK) :

RID / ADR : 3 hazard information No: 31C

IMO : 3 packing group 3

ICAO : 3 packing group 3

15. REGULATORY INFORMATION

CLASSIFICATION FOR HANDLING

EC No : INDEX No : EINECS No :

RISK SYMBOL: Xi

RISK PHRASES :R10, R43

SAFETY PHRASES : S24, S51

ADVISORY PHRASES : Avoid inhalation or contact with vapours. Do not apply by spray or to large surfaces without using adequate mechanical extraction of vapours.

EC AND NATIONAL LEGISLATION

CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH) 1988

ENVIRONMENTAL PROTECTION ACT 1990

ENVIRONMENTAL PROTECTION (DUTY OF CARE) REGULATIONS 1991

CONTROL OF POLLUTION (SPECIAL WASTES) REGULATIONS 1980

16. OTHER INFORMATION

RECOMMENDED USES : Production of adhesives with polyols or polyamines.

RECOMMENDED RESTRICTIONS : Not for use by the general public.

FURTHER INFORMATION :

Rev 2 - Issued 21 January 1999